Spheres of Influence

If ever there was an example of the power of simplicity, it’s been the rise of what we call floating-granite-ball fountains. They’ve been around since the early 1990s and are now found in a range of commercial and even residential settings.

I hadn’t ever seen one when I joined HydroDramatics back in 1996, but I do know that soon after I started we began receiving a steady flow on inquiries about them – and it wasn’t long before we received our first commission for a floating sphere for a major automobile manufacturer in Detroit.

As has been the case every time a prospect has asked about one of these fountains since then, school administrators wanted

something interesting, interactive and sculptural, and the floating ball seemed the natural choice.

We’ve seen these engaging watershapes grow steadily in popularity through the years, so much so that they’ve effectively passed beyond “fad” status to become an accepted part of our repertoire. In fact, when we added them to our web site just a few years ago, inquiries about the spheres really started to flow – and they’ve continued to grow in numbers to this day.

ROUND AND ROUND

In concept, floating-granite-ball fountains are extremely simple: They include a large granite ball measuring anywhere from two to ten feet in diameter and a matching concave socket that envelops about 30 percent of the sphere’s surface. When water flows into the socket, it is pressed to an infinitesimally thin sheet by the weight of the ball. Nonetheless, that small quantity of water causes the ball to hydroplane and enables it to rotate.

Achieving this dynamic effect obviously depends on having a perfectly machined tandem of sphere and socket. Any irregularity anywhere will stop the ball from floating and spinning. Once sphere and socket are matched, the socket is core drilled in one or two places (depending upon the desired effect) to accommodate a low-pressure flow of water – typically between 12 and 20 pounds per square inch, which is about what you get from a garden hose.

The shiny, wet surfaces of the heavy granite balls are visually striking no matter where they are placed. As a result, we’ve provided these fountains for a wide range of clients and settings, including hospitals, casinos, universities, public spaces, business parks and high-end residences.

The granite balls come in a wide range of colors and sizes, but it may be said that the real distinctiveness of each design comes from the structures that support the sockets. These housings range from the simple to the elaborate – and from those that make the moving balls completely accessible to those that make them more purely sculptural (and less interactive).

As pretty and visually versatile as these objects may be, it’s the interactive nature of these fountains that really give them their greatest appeal. When anyone looks at a ball of granite that may be up to eight feet across, they know it’s heavy. The fact that they can walk up to it and move it freely with just their fingertips is a constant source of amazement. Kids love these fountains, but it’s my sense that they’re even more intriguing to adults who have a fuller understanding of just how heavy the ball is and how improbable is its ability to move so freely on a paper-thin sheet of water.

Stepping beyond that immediate attraction is a more enigmatic source of the appeal: Spherical forms are universal icons in geometry, science, geometry and even religion. With a form that is symbolic and organic as well as architectural, these fountains work when set amid natural forms of plant and stone as well as within the rigid geometries of modern architecture.

And then there’s the fun factor: These fountains are beautiful works of art that basically function as huge toys.

THE IDEAL MATERIAL

Paralleling this emergence of these fountains has been a resurgence of interest in granite as a building material. This has had the benefit of inclining suppliers to seek out and harvest stone in a huge range of colors and visual textures.

The floating balls and sockets must be made of granite because it is less porous than other stones and much harder than most. Also, granite can be found in large enough pieces to create the balls, whereas other hard materials are often not so commonly quarried in solid pieces that can be machined into large spheres.

While these watershapes tend to become the center of attention in most placements, the floating granite balls also can be used as shapely accents in broader landscapes – and as rewards to the curious who take a few extra steps to see what’s going on.

Because the perfection of the sphere is so critical, preventing wear is an important issue. If the spheres were to be made of marble or quartz, for example, they would be exponentially more expensive while being quite susceptible to damage from exposure, for instance, to acid rain. With granite, by contrast, both spheres and sockets maintain their critical smooth finish and perfect spherical shape indefinitely.

Once, however, we completed a floating-ball project for the Golden Moon Casino in Philadelphia, Miss., in which the clients’ natural desire was to have a sphere that was gold in color. We were able to find a stone with a color acceptable to the client in Italy, but when it was installed, this particular granite was porous enough that it started absorbing water and soon became unbalanced.

The Supply Side Worldwide, there are only a small handful of companies that create the granite balls and sockets used in the fountains described in the accompanying text – and all of them are overseas. We obtain ours from Sorvikivi, a company based in Savitaipale, Finland, and work hand in hand with the company’s U.S. representative, Lasse Sinisalo of Quarry Line in Naperville, Ill. Using a form of ultrasound technology, Sorvikivi checks each piece for internal defects before it is machined. Once the machining is done, the ball is evaluated for balance because, obviously enough, granite is a natural material and weight is distributed inconsistently within the resulting spherical masses. As a result, before they’re shipped the balls are all balanced using a lead inserts – a process very similar to balancing an automobile tire. — A.G.

As it turns out, this gold-colored granite was much less durable than other forms. Although we were able to seal this ball and put it back in service, we learned a quick lesson in the fact that not all granites are created equal. That one project aside, however, the granites we’ve used have held up without the need to apply surface sealers of any sort.

We’ve also found ways to make each project distinct. Where the spherical form of the ball is an essential standard element of these fountains, there’s an opportunity for considerable variation in the treatment of the socket. In some situations, for example, we’ve obscured the socket in fieldstone frames. In others, the socket’s exterior faces have been sculpted into various shapes.

The way the water flows out of the socket is also subject to variation. In some designs, for instance, the water flows into a channel right around the perimeter of the socket, while in others the water trickles over the edges of the socket and can be directed to shape a variety of subtle effects.

And of course, the way the water flows within the socket is critical to the ball’s ability to move. In some cases, the balls are balanced so they spin freely in all directions. In others – particularly those in which the ball is etched with the continents to represent a globe – the ball can be weighted to create a heavy spot for the purpose of creating an “axis.” (In such situations, the effect of a spinning “globe” is enhanced by using a single water inlet in the socket to spin the ball in a specific direction, with the angle of the inlet governing the ball’s rotation. For random spinning, two inlets are typically used to provide a balanced flow.)

MAKING CONNECTIONS

Our role in providing these fountains typically involves working with the client to develop the design, communicating with the stone fabricator to procure the balls and sockets and packaging them with the necessary pump, filter and water-treatment equipment mounted in turnkey equipment vaults.

Because of the precise tolerances of the balls and their sockets, water quality is of absolute importance: Even something as small as a grain of sand can disrupt the hydroplaning effect, as can any build-up of algae. These systems typically contain less than 100 gallons of water, so while the systems may be small, they must be radically efficient.

For all their versatility as visual design elements, the floating balls are mostly about the effect they have on people. Young or old, they don’t seem able to resist interacting with something so massive that nonetheless floats on a thin skin of water. It’s a magical effect – one that is, without doubt, here to stay.

The balls themselves are extremely heavy. Spheres with two-foot diameters (the smallest we provide) weigh in at 670 pounds, while eight-foot balls weigh a whopping 45,200 pounds. In all cases, they are delivered to their sockets in custom-made slings.

Despite the fact that these are relatively expensive fountains that can cost anywhere from $20,000 to well beyond $200,000, a growing number of clients have been willing to make the investment because they see these fountains as cost-efficient. The fact that they’re made of stone and have a distinctly simple design certainly helps. The fountains will basically last forever, and in all the years we’ve been designing and installing them, we’ve yet to have one fail in any way.

One Good Spin As described in the accompanying text, floating-granite-ball fountains can be used to great effect in a wide range of settings. They are beautiful in their simplicity and quite dynamic as interactive watershapes, often serving as focal points and gathering spots in public places or commercial facilities. In some settings, including the Martin Luther King Jr. Memorial in Rocky Mount, N.C., they become powerfully symbolic and evocative. If we had to choose, however, it’s likely our favorite floating-ball project would be the one we completed for the St. Louis Children’s Hospital’s Olson Family Garden. Designed by Herb Shawl of EDAW, the renowned landscape architecture firm, the garden’s fountain was set up to enable children of compromised physical condition to spin “the world” with the slightest touch of a hand. It was one of the first projects of this nature we’d done, and it was incredibly exciting (and moving) to watch these children light up with delight, amazement and a sense of empowerment as they interacted with the ball. — A.G.

We heard stories of improperly machined balls, inadequate sub-grade support, balls broken in transit and other tales of woe, but we’ve found that by working with a reliable stone vendor and obtaining balls and sockets that have been properly machined and balanced, those sorts of issues have never arisen for us and as a result we take great pleasure with every additional floating-ball fountain we design and install.

Certainly, these fountains occupy a narrow niche, but we’ve always been impressed by the universality of their appeal: There’s a near-addictive quality to playing with them and they invariably attract a great deal of attention.

It’s tough to say whether they will continue to grow in popularity or fall out of favor someday. For now, however, it’s clear that floating-granite-ball fountains have taken their place among the panoply of watershapes and will continue to delight and amaze generations of people of all ages.

Anne Gunn is a fountain consultant for HydroDramatics, the full-service fountain division of Missouri Machinery & Engineering Co. in St. Louis. An affiliate member of both the American Society of Landscape Architects and the American Institute of Architects, she joined HydroDramatics and became part of the fountain industry in 1996 after a 22-year career in industrial sales for the steel industry. The firm, a leading designer and installer of architectural fountains throughout the United States and internationally, is widely known for its work on such prominent projects as the St. Louis waterfront’s Gateway Geyser – the world’s tallest fountain – and the fountain for the U.S. Embassy in Moscow.