defects
In the course of my watershaping career, I've come to divide remodeling projects into two distinct categories. The first is what I call cosmetic refurbishing. Here, all a homeowner usually wants is a superficial updating of a pool's or spa's appearance or performance through application of a new interior finish, some fresh waterline tile, maybe new coping and decking and, often, new equipment or perhaps a poolside waterfeature. I avoid these projects as energetically as possible because, typically, the challenges are thin and there's little room for creativity. The second category encompasses what I call
I retired a while back after working for more than 20 years as a pond designer and installer. The result of that change in life is that I'm busier than ever. I still hear, for instance, from old clients who want me to come back to modify or expand an existing pond/stream/waterfall system. Those requests, often from people who have become good friends through the years, are hard to resist. More often, however, I'm being asked to teach. I'm frequently approached by
Rooftop pools and other similarly elevated swimming pool structures present unique sets of considerations that must be thoroughly addressed by anyone involved in their design and construction. As was discussed in the first article in this two-part series ("Elevated Engineering," click here), it is common for these watershapes to be constructed inside a concrete vault or supported on a concrete structural slab - either of which is usually
This is a case where the client said it best: In describing his backyard pond as "a HazMat spill," he put it more bluntly and succinctly than I ever would or could have. And he was right: The little pond was a complete, total, unholy mess. For starters, the waterfall and skimmer had been placed within inches of each other in a hard-to-access corner, thereby obliterating
