By Randy Beard
It’s been a while since I shared a video with you through WaterShapes.com, but it occurred to me (even after a good, long gap) that this one fit perfectly into the series we once offered on the subject of site access and the ways equipment and the products of demolition and construction can be moved from place to place under
By Brian Van Bower
‘When it comes to just about anything that matters in life,’ wrote Brian Van Bower to open his June 1999 Aqua Culture column, ‘the difference between success and failure is often your mindset and the attitude you bring to each situation, event or occasion.
‘That’s a huge generalization,’ he added, ‘but it’s something I consider each and every time I prepare myself for
By Stephanie Rose
‘Here in America, our idea of history goes back only so far,’ wrote Stephanie Rose to open her May 2004 Natural Companions column. ‘We don’t have the “ancient” structures that still set the tone and architectural vocabulary the way they do in Europe, Asia and other places.
‘For those who prefer modern or contemporary styles, this lack of history may
By Bruce Zaretsky
‘As winter draws to a close here in the northeast,’ wrote Bruce Zaretsky to start his May 2009 On the Level column, ‘we begin preparing in earnest to deal with the inevitable springtime rush. There are contracts to sign, materials to order, plants to grow, schedules to set and hires (if any) to be made. And we do all of this knowing that, once the weather breaks, we want to burst out of the gate like an odds-on favorite at the Kentucky Derby.
‘To make this happen,’ he continued, ‘we
By Jim McNicol
The triennial publication of the National Electrical Code is an event of critical importance to any contractor or subcontractor performing electrical installations or repairs. First published in 1897 and produced since 1911 by the National Fire Protection Association, the NEC is now enforced in all 50 states and also serves as the basis for codes in several foreign nations.
As has been the case with all editions published to date, the 1999 edition of the code is designed to ensure “the practical safeguarding of
By Stephanie Rose
Take a quick look at the area surrounding almost any pool, spa or waterfeature and you’re sure to see living proof that plants and man-made bodies of water go hand in hand. No matter what form the greenery takes – grass, hedges, trees, shrubs, flowers, even cacti – the fact is that plant life is seen virtually everywhere decorative or recreational water is found.
For all of this close physical proximity, however, landscape designers and the installers of pools, spas, fountains and other watershapes have generally tended to operate in
By Curt Straub
As a former shotcrete builder myself, I believe you can’t find a better method of building a pool, spa, pond or waterfeature of any type than by using pneumatically placed concrete, or “shotcrete.” The method and the material offer the designer and builder great and often incredible design flexibility, and the resulting watershapes will last several lifetimes.
Given that the vast majority of watershapers around the world depend on shotcrete as their primary construction material, it only makes sense that we should know as much as possible about putting this amazing product to its best possible use. Unfortunately, however, that’s not always the case.
There’s little argument that the process of shotcrete construction is laborious and demanding, that it requires a major logistical and physical effort and that fairly precise timing is necessary. For all the focus it takes to apply it and shape it just so, however, I have observed a couple of critical steps many builders overlook in the press of getting the job done – the most important of them being the proper curing of the
By Stephanie Rose
Before we dive into discussions of plantings or the various components of landscaping work, I think it’s important to define roles and talk about relationships among the trades involved in watershaping projects – in other words, to take a basic look at who does what.
We can all save time and money by knowing from the beginning of the job who is going to handle each phase and detail as well as who is qualified, trained or licensed to perform the various tasks needed to get the job done. Planning this up front might even result in greater profits, and it definitely will make your job easier.
I know it’s the goal of this magazine to build a greater “watershaping community” where both landscape professionals and those who
By Brian Bower
Several years ago, at a time when I was still pretty wet behind the ears, a young, attractive woman invited me to join our local Chamber of Commerce and attend a meeting with her.
“Sure,” I said. “I’ll give it a shot.” I showed up for the event and met a bunch of banker types, and it seemed like everyone was a vice president of something or other. I was just starting to get comfortable when the woman who had invited me explained that it was customary for new members to stand up and tell everyone about his or her business.
As luck would have it, I didn’t go first. Another guy stood up before me and talked for a few minutes about his carpet-cleaning business – a trade he obviously found to be less than stimulating. He spoke in a monotone voice and made carpet cleaning sound like, well, carpet cleaning. Inspired by his lack of enthusiasm, I decided to
By Larry Parmelee & Wayne Schick
If you’re in the business of digging holes, lining them with steel and concrete and then filling them with water, you need to know that the ground will support the structures. That’s particularly true of hillside areas, but the same can be said of areas with high water tables, expansive soils or improperly compacted fill – to name just a few.
We’ve all heard the horror stories of distressed vessels, including pools and spas out of level, significant structural shell cracks and differential movement between the decking and the shell. As we see it, part of the problem is that many pools are simply built with too low a structural tolerance for the stresses to which they
By Brian Van Bower
One of the most critical moments in the life of any watershaper occurs when he or she meets prospective clients face to face for the first time. This is when jobs are won or lost – and, more significant, the point at which watershaper and clients begin what can become a long and fruitful relationship.
I’ll state right up front that I do not approach my initial customer meetings with the idea of walking out with a signed contract and a check. Instead, I go in trying to do what I can to help clients realize their dream of becoming owners of a quality watershape. Whether I end up
Construction can be a tough business: Even minor conflicts or disputes often lead to courtroom battles, and you can hardly blame people in the trades for thinking ‘potential lawsuit’ every time they sign a contract. One way to avoid these lose/lose scenarios, says aquatic consultant Curt Straub, is to implement a simple, up-front agreement designed to foster cooperation among designers, engineers, contractors and clients.
By Clint West & Leah Canon
Long before the Bobcats show up, most watershape designers will have used some sort of two-dimensional artwork to excavate their customers’ imaginations. Perhaps it starts with old photographs in a portfolio, but it almost always ends up with new drawings that encourage precise, detailed communication between designer and client in a way that can never be fully achieved with verbal descriptions or written proposals.
If done with appropriate detail and skill, a drawing gives designer and client the opportunity to explore the